Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
| d |
75 mm
|
Bore diameter |
|---|---|---|
| tΔdmp | -0.012 – 0 mm | Deviation limits of mid-range bore diameter |
| D |
160 mm
|
Outside diameter |
| tΔDmp | -0.018 – 0 mm | Deviation limits of mid-range outside diameter |
| B |
37 mm
|
Width |
| tΔBs | -0.1 – 0 mm | Deviation limits of ring width |
| d1 |
≈ 101.4 mm
|
Shoulder diameter |
| D2 |
≈ 138.4 mm
|
Recess diameter |
| r1,2 |
min. 2.1 mm
|
Chamfer dimension |
|
P6 and tighter width tolerance
|
ISO tolerance class for dimensions |
| da |
min. 87 mm
|
Diameter of shaft abutment |
|---|---|---|
| Da |
max. 148 mm
|
Diameter of housing abutment |
| ra |
max. 2 mm
|
Radius of shaft or housing fillet |
| Basic dynamic load rating | C |
119 kN
|
|---|---|---|
| Basic static load rating | C0 |
76.5 kN
|
| Fatigue load limit | Pu |
3 kN
|
| Reference speed |
9 000 r/min
|
|
| Limiting speed |
5 600 r/min
|
|
| Minimum load factor | kr |
0.03
|
| Calculation factor | f0 |
13.2
|
| Range of section height at inner ring of assembled bearing | tKia |
20 µm
|
|---|---|---|
| Range of section height at outer ring of assembled bearing | tKea |
45 µm
|
| ISO tolerance class for geometrical tolerances |
Normal
|
| d |
2.9528 in
|
Bore diameter |
|---|---|---|
| tΔdmp | -12 – 0 µm | Deviation limits of mid-range bore diameter |
| D |
6.2992 in
|
Outside diameter |
| tΔDmp | -18 – 0 µm | Deviation limits of mid-range outside diameter |
| B |
1.4567 in
|
Width |
| tΔBs | -100 – 0 µm | Deviation limits of ring width |
| d1 |
≈ 3.9921 in
|
Shoulder diameter |
| D2 |
≈ 5.4488 in
|
Recess diameter |
| r1,2 |
min. 0.0827 in
|
Chamfer dimension |
|
P6 and tighter width tolerance
|
ISO tolerance class for dimensions |
| da |
min. 3.4252 in
|
Diameter of shaft abutment |
|---|---|---|
| Da |
max. 5.8268 in
|
Diameter of housing abutment |
| ra |
max. 0.0787 in
|
Radius of shaft or housing fillet |
| Basic dynamic load rating | C |
26 752 lbf
|
|---|---|---|
| Basic static load rating | C0 |
17 198 lbf
|
| Fatigue load limit | Pu |
674 lbf
|
| Reference speed |
9 000 r/min
|
|
| Limiting speed |
5 600 r/min
|
|
| Minimum load factor | kr |
0.03
|
| Calculation factor | f0 |
13.2
|
| Range of section height at inner ring of assembled bearing | tKia |
20 µm
|
|---|---|---|
| Range of section height at outer ring of assembled bearing | tKea |
45 µm
|
| ISO tolerance class for geometrical tolerances |
Normal
|
Reviews
There are no reviews yet.