Single direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.
| d |
45 mm
|
Bore diameter |
|---|---|---|
| D |
65 mm
|
Outside diameter |
| H |
14 mm
|
Height |
| d1 |
≈65 mm
|
Outside diameter shaft washer |
| D1 |
≈47 mm
|
Inner diameter housing washer |
| r1,2 |
min.0.6 mm
|
Chamfer dimension washer |
| da |
min.57 mm
|
Abutment diameter shaft |
|---|---|---|
| Da |
max.53 mm
|
Abutment diameter housing |
| ra |
max.0.6 mm
|
Fillet radius |
| Basic dynamic load rating | C |
26.5 kN
|
|---|---|---|
| Basic static load rating | C0 |
69.5 kN
|
| Fatigue load limit | Pu |
2.55 kN
|
| Reference speed |
4 500 r/min
|
|
| Limiting speed |
6 300 r/min
|
|
| Minimum load factor | A |
0.03
|
| d |
1.7717 in
|
Bore diameter |
|---|---|---|
| D |
2.5591 in
|
Outside diameter |
| H |
0.5512 in
|
Height |
| d1 |
≈2.5591 in
|
Outside diameter shaft washer |
| D1 |
≈1.8504 in
|
Inner diameter housing washer |
| r1,2 |
min.0.0236 in
|
Chamfer dimension washer |
| da |
min.2.2441 in
|
Abutment diameter shaft |
|---|---|---|
| Da |
max.2.0866 in
|
Abutment diameter housing |
| ra |
max.0.0236 in
|
Fillet radius |
| Basic dynamic load rating | C |
5 957 lbf
|
|---|---|---|
| Basic static load rating | C0 |
15 624 lbf
|
| Fatigue load limit | Pu |
573 lbf
|
| Reference speed |
4 500 r/min
|
|
| Limiting speed |
6 300 r/min
|
|
| Minimum load factor | A |
0.025
|
Reviews
There are no reviews yet.