UCP 206

  • Strong
  • Designed for a constant and alternating rotation
  • Ready to mount
  • Lubricated and sealed bearing
  • Quick locking onto the shaft
  • Cost-effective
Category:

Description

Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards

Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.

Reviews

There are no reviews yet.

Be the first to review “UCP 206”

Your email address will not be published. Required fields are marked *

Compliance with standard
JIS
Purpose specific
For material handling applications
Material, housing
Cast iron
Sealing, bearing
Seal and flinger on both sides
Sealing type, bearing
Contact, standard
Sealing, unit
Without
Coating
Without
Dimensions - UCP 206Dimensions - UCP 206Dimensions - UCP 206

Dimensions

d
30 mm
 Bore diameter
d1
≈ 39.8 mm
 Shoulder diameter of inner ring
A
45 mm
 Base width
A1
27 mm
 Top width
B
38.1 mm
 Width of inner ring
B4
5.5 mm
 Distance from locking device side face to thread centre
H
42.9 mm
 Height of spherical seat centre
H1
16.5 mm
 Foot height
H2
83.5 mm
 Overall height
J
121 mm
 Distance between attachment bolts
J
max. 125 mm
 Maximum distance between attachment bolts
J
min. 117 mm
 Minimum distance between attachment bolts
L
165 mm
 Overall length
N
17 mm
 Diameter of attachment bolt hole
N1
21 mm
 Length of attachment bolt hole
s1
22.2 mm
 Distance from locking device side face to raceway centre
Threaded hole
RG
1/4-28 UNF
 Housing thread for the grease fitting
R1
1 mm
 Axial position of the housing thread
Rα
45 °
 Angular position of the housing thread
Grease fitting
DN
6.6 mm
 Diameter of head sphere of grease fitting
SWN
7.94 mm
 Hexagonal key size for the grease fitting
GN
1/4-28 UNF
 Thread of grease fitting

Calculation data

Basic dynamic load rating C
19.5 kN
Basic static load rating C0
11.4 kN
Fatigue load limit Pu
0.48 kN
Limiting speed
5 000 r/min
Limiting speed with shaft tolerance h6

Mounting information

Set screw G2
M6x1
Hexagonal key size for set screw
3.05 mm
Recommended tightening torque for set screw
4 N·m
Recommended diameter for attachment bolts, mm G
14 mm
Recommended diameter for attachment bolts, inch G
0.5625 in

Compliance with standard
JIS
Purpose specific
For material handling applications
Material, housing
Cast iron
Sealing, bearing
Seal and flinger on both sides
Sealing type, bearing
Contact, standard
Sealing, unit
Without
Coating
Without
Dimensions - UCP 206Dimensions - UCP 206Dimensions - UCP 206

Dimensions

d
1.1811 in
 Bore diameter
d1
≈ 1.5669 in
 Shoulder diameter of inner ring
A
1.7717 in
 Base width
A1
1.063 in
 Top width
B
1.5 in
 Width of inner ring
B4
0.2165 in
 Distance from locking device side face to thread centre
H
1.689 in
 Height of spherical seat centre
H1
0.6496 in
 Foot height
H2
3.2874 in
 Overall height
J
4.7638 in
 Distance between attachment bolts
J
max. 4.9213 in
 Maximum distance between attachment bolts
J
min. 4.6063 in
 Minimum distance between attachment bolts
L
6.4961 in
 Overall length
N
0.6693 in
 Diameter of attachment bolt hole
N1
0.8268 in
 Length of attachment bolt hole
s1
0.874 in
 Distance from locking device side face to raceway centre
Threaded hole
RG
1/4-28 UNF
 Housing thread for the grease fitting
R1
0.0394 in
 Axial position of the housing thread
Rα
45 °
 Angular position of the housing thread
Grease fitting
DN
0.2598 in
 Diameter of head sphere of grease fitting
SWN
0.3126 in
 Hexagonal key size for the grease fitting
GN
1/4-28 UNF
 Thread of grease fitting

Calculation data

Basic dynamic load rating C
4 384 lbf
Basic static load rating C0
2 563 lbf
Fatigue load limit Pu
108 lbf
Limiting speed
5 000 r/min
Limiting speed with shaft tolerance h6

Mounting information

Set screw G2
M6x1
Hexagonal key size for set screw
0.1201 in
Recommended tightening torque for set screw
35.4 lbf·in
Recommended diameter for attachment bolts, mm G
14 mm
Recommended diameter for attachment bolts, inch G
0.5625 in

Related products