Single direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.
| d |
10 mm
|
Bore diameter |
|---|---|---|
| D |
24 mm
|
Outside diameter |
| H |
9 mm
|
Height |
| d1 |
≈ 24 mm
|
Outside diameter shaft washer |
| D1 |
≈ 11 mm
|
Inner diameter housing washer |
| r1,2 |
min. 0.3 mm
|
Chamfer dimension washer |
| da |
min. 19 mm
|
Abutment diameter shaft |
|---|---|---|
| Da |
max. 15 mm
|
Abutment diameter housing |
| ra |
max. 0.3 mm
|
Fillet radius |
| Basic dynamic load rating | C |
8.71 kN
|
|---|---|---|
| Basic static load rating | C0 |
12.2 kN
|
| Fatigue load limit | Pu |
0.45 kN
|
| Reference speed |
9 500 r/min
|
|
| Limiting speed |
13 000 r/min
|
|
| Minimum load factor | A |
0.0012
|
| d |
0.3937 in
|
Bore diameter |
|---|---|---|
| D |
0.9449 in
|
Outside diameter |
| H |
0.3543 in
|
Height |
| d1 |
≈ 0.9449 in
|
Outside diameter shaft washer |
| D1 |
≈ 0.4331 in
|
Inner diameter housing washer |
| r1,2 |
min. 0.0118 in
|
Chamfer dimension washer |
| da |
min. 0.748 in
|
Abutment diameter shaft |
|---|---|---|
| Da |
max. 0.5906 in
|
Abutment diameter housing |
| ra |
max. 0.0118 in
|
Fillet radius |
| Basic dynamic load rating | C |
1 958 lbf
|
|---|---|---|
| Basic static load rating | C0 |
2 743 lbf
|
| Fatigue load limit | Pu |
101 lbf
|
| Reference speed |
9 500 r/min
|
|
| Limiting speed |
13 000 r/min
|
|
| Minimum load factor | A |
0.0012
|
Reviews
There are no reviews yet.