Single direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.
| d |
40 mm
|
Bore diameter |
|---|---|---|
| D |
90 mm
|
Outside diameter |
| H |
36 mm
|
Height |
| d1 |
≈90 mm
|
Outside diameter shaft washer |
| D1 |
≈42 mm
|
Inner diameter housing washer |
| r1,2 |
min.1.1 mm
|
Chamfer dimension washer |
| da |
min.70 mm
|
Abutment diameter shaft |
|---|---|---|
| Da |
max.60 mm
|
Abutment diameter housing |
| ra |
max.1 mm
|
Fillet radius |
| Basic dynamic load rating | C |
95.6 kN
|
|---|---|---|
| Basic static load rating | C0 |
183 kN
|
| Fatigue load limit | Pu |
6.8 kN
|
| Reference speed |
2 400 r/min
|
|
| Limiting speed |
3 400 r/min
|
|
| Minimum load factor | A |
0.26
|
| d |
1.5748 in
|
Bore diameter |
|---|---|---|
| D |
3.5433 in
|
Outside diameter |
| H |
1.4173 in
|
Height |
| d1 |
≈3.5433 in
|
Outside diameter shaft washer |
| D1 |
≈1.6535 in
|
Inner diameter housing washer |
| r1,2 |
min.0.0433 in
|
Chamfer dimension washer |
| da |
min.2.7559 in
|
Abutment diameter shaft |
|---|---|---|
| Da |
max.2.3622 in
|
Abutment diameter housing |
| ra |
max.0.0394 in
|
Fillet radius |
| Basic dynamic load rating | C |
21 492 lbf
|
|---|---|---|
| Basic static load rating | C0 |
41 140 lbf
|
| Fatigue load limit | Pu |
1 529 lbf
|
| Reference speed |
2 400 r/min
|
|
| Limiting speed |
3 400 r/min
|
|
| Minimum load factor | A |
0.26
|
Reviews
There are no reviews yet.