Single direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.
| d |
40 mm
|
Bore diameter |
|---|---|---|
| D |
60 mm
|
Outside diameter |
| H |
13 mm
|
Height |
| d1 |
≈60 mm
|
Outside diameter shaft washer |
| D1 |
≈42 mm
|
Inner diameter housing washer |
| r1,2 |
min.0.6 mm
|
Chamfer dimension washer |
| da |
min.52 mm
|
Abutment diameter shaft |
|---|---|---|
| Da |
max.48 mm
|
Abutment diameter housing |
| ra |
max.0.6 mm
|
Fillet radius |
| Basic dynamic load rating | C |
25.5 kN
|
|---|---|---|
| Basic static load rating | C0 |
63 kN
|
| Fatigue load limit | Pu |
2.32 kN
|
| Reference speed |
5 000 r/min
|
|
| Limiting speed |
7 000 r/min
|
|
| Minimum load factor | A |
0.02
|
| d |
1.5748 in
|
Bore diameter |
|---|---|---|
| D |
2.3622 in
|
Outside diameter |
| H |
0.5118 in
|
Height |
| d1 |
≈2.3622 in
|
Outside diameter shaft washer |
| D1 |
≈1.6535 in
|
Inner diameter housing washer |
| r1,2 |
min.0.0236 in
|
Chamfer dimension washer |
" alt="Abutment dimensions - 51108" />| da |
min.2.0472 in
|
Abutment diameter shaft |
|---|---|---|
| Da |
max.1.8898 in
|
Abutment diameter housing |
| ra |
max.0.0236 in
|
Fillet radius |
| Basic dynamic load rating | C |
5 733 lbf
|
|---|---|---|
| Basic static load rating | C0 |
14 163 lbf
|
| Fatigue load limit | Pu |
522 lbf
|
| Reference speed |
5 000 r/min
|
|
| Limiting speed |
7 000 r/min
|
|
| Minimum load factor | A |
0.02
|
Reviews
There are no reviews yet.