Single direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.
| d |
1.1811 in
|
Bore diameter |
|---|---|---|
| D |
2.0472 in
|
Outside diameter |
| H |
0.6299 in
|
Height |
| d1 |
≈2.0472 in
|
Outside diameter shaft washer |
| D1 |
≈1.2598 in
|
Inner diameter housing washer |
| r1,2 |
min.0.0236 in
|
Chamfer dimension washer |
| da |
min.1.6929 in
|
Abutment diameter shaft |
|---|---|---|
| Da |
max.1.5354 in
|
Abutment diameter housing |
| ra |
max.0.0236 in
|
Fillet radius |
| Basic dynamic load rating | C |
5 643 lbf
|
|---|---|---|
| Basic static load rating | C0 |
11 465 lbf
|
| Fatigue load limit | Pu |
418 lbf
|
| Reference speed |
4 800 r/min
|
|
| Limiting speed |
6 700 r/min
|
|
| Minimum load factor | A |
0.013
|
| d |
1.1811 in
|
Bore diameter |
|---|---|---|
| D |
2.0472 in
|
Outside diameter |
| H |
0.6299 in
|
Height |
| d1 |
≈2.0472 in
|
Outside diameter shaft washer |
| D1 |
≈1.2598 in
|
Inner diameter housing washer |
| r1,2 |
min.0.0236 in
|
Chamfer dimension washer |
| da |
min.1.6929 in
|
Abutment diameter shaft |
|---|---|---|
| Da |
max.1.5354 in
|
Abutment diameter housing |
| ra |
max.0.0236 in
|
Fillet radius |
| Basic dynamic load rating | C |
5 643 lbf
|
|---|---|---|
| Basic static load rating | C0 |
11 465 lbf
|
| Fatigue load limit | Pu |
418 lbf
|
| Reference speed |
4 800 r/min
|
|
| Limiting speed |
6 700 r/min
|
|
| Minimum load factor | A |
0.013
|
Reviews
There are no reviews yet.