Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
| d |
45 mm
|
Bore diameter |
|---|---|---|
| tΔdmp | -0.012 – 0 mm | Deviation limits of mid-range bore diameter |
| D |
120 mm
|
Outside diameter |
| tΔDmp | -0.015 – 0 mm | Deviation limits of mid-range outside diameter |
| B |
29 mm
|
Width |
| tΔBs | -0.12 – 0 mm | Deviation limits of ring width |
| d1 |
≈ 68.91 mm
|
Shoulder diameter |
| D1 |
≈ 95.85 mm
|
Shoulder diameter |
| r1,2 |
min. 2 mm
|
Chamfer dimension |
|
Normal
|
ISO tolerance class for dimensions |
| da |
min. 58 mm
|
Diameter of shaft abutment |
|---|---|---|
| Da |
max. 107 mm
|
Diameter of housing abutment |
| ra |
max. 2 mm
|
Radius of shaft or housing fillet |
| Basic dynamic load rating | C |
76.1 kN
|
|---|---|---|
| Basic static load rating | C0 |
45 kN
|
| Fatigue load limit | Pu |
1.9 kN
|
| Reference speed |
13 000 r/min
|
|
| Limiting speed |
8 500 r/min
|
|
| Minimum load factor | kr |
0.04
|
| Calculation factor | f0 |
12.1
|
| Range of section height at inner ring of assembled bearing | tKia |
15 µm
|
|---|---|---|
| Range of section height at outer ring of assembled bearing | tKea |
35 µm
|
| ISO tolerance class for geometrical tolerances |
Normal
|
| d |
1.7717 in
|
Bore diameter |
|---|---|---|
| tΔdmp | -12 – 0 µm | Deviation limits of mid-range bore diameter |
| D |
4.7244 in
|
Outside diameter |
| tΔDmp | -15 – 0 µm | Deviation limits of mid-range outside diameter |
| B |
1.1417 in
|
Width |
| tΔBs | -120 – 0 µm | Deviation limits of ring width |
| d1 |
≈ 2.713 in
|
Shoulder diameter |
| D1 |
≈ 3.7736 in
|
Shoulder diameter |
| r1,2 |
min. 0.0787 in
|
Chamfer dimension |
|
Normal
|
ISO tolerance class for dimensions |
| da |
min. 2.2835 in
|
Diameter of shaft abutment |
|---|---|---|
| Da |
max. 4.2126 in
|
Diameter of housing abutment |
| ra |
max. 0.0787 in
|
Radius of shaft or housing fillet |
| Basic dynamic load rating | C |
17 108 lbf
|
|---|---|---|
| Basic static load rating | C0 |
10 116 lbf
|
| Fatigue load limit | Pu |
427 lbf
|
| Reference speed |
13 000 r/min
|
|
| Limiting speed |
8 500 r/min
|
|
| Minimum load factor | kr |
0.035
|
| Calculation factor | f0 |
12.1
|
| Range of section height at inner ring of assembled bearing | tKia |
15 µm
|
|---|---|---|
| Range of section height at outer ring of assembled bearing | tKea |
35 µm
|
| ISO tolerance class for geometrical tolerances |
Normal
|
Reviews
There are no reviews yet.